The characteristics of:

The mechanism of the atomizer spray drying is the material liquid in high speed rotation (circular velocity 90-160m/s) role and atomization thrown out by centrifugal force from the edge of the disk tray. The whole system adopts hot air medium open cycle, material and flow drying.

It has the following characteristics:

Droplets larger surface area, the drying time required for short. The powder particles are small (80-220 mesh), good fluidity. Flexible.

When the air temperature is higher than 150 DEG C heat utilization than other spray high. Not high requirements for plant.

Technical parameters

Type LPG-5 LPG-25 LPG-50 LPG-100 LPG-150 LPG-200 LPG-500 LPG-1000

The inlet temperature (C) 130-300

The outlet temperature of the (C) 70-90

Moisture evaporation (kg/h) 3 ~ 718 ~ 2535 ~ 5075 ~ 100120 ~ 150170 ~ 210400 ~ 500800 ~ 1000

The fog of the transmission type compressed air drive electric drive electric drive electric drive electric drive electric drive electric electric transmission

Speed (r.p.m) 25000 18000-27000 18000-27000 18000-27000 15000-18000 15000-18000 12000-15000 12000-15000

Heat a full electric steaming + electric filling steam + electric repair or hot stove

The transmission power (kw) 4.2141823294376109

The heating power (kw) 183648728496144

Dust recycling rate greater than 97%

Diameter (m) 1.2 1.9 2.2 2.56 2.96 3.36 5.2 7.6

Height (m) 2.2 3.6 4.6 5.4 6.37 9.2 12.4